Description of Petzl Stop DescenderOriginally designed for caving, the Petzl Stop Descender is a device that stops or considerably slows descent when the handle is released Locking mechanism can be disabled with a carabiner when a hand is needed to negotiate a drop Handle is squeezed to descend normally, controlling speed with the other hand; slack rope can easily be taken up All control surfaces are stainless steel Works best with clean, flexible rope, stiff rope may result in greatly impaired or reduced friction and the stop feature may be inoperative.Features:Weight: 326 gramsFits rope sizes: 9 – 12 millimetersSuitable for belaying: No Suitable for rappelling: Yes
Description of Petzl Pirana Canyoning DescenderDescender with three braking positions, designed for use with canyoning descent techniques. Features:Three different braking positions to choose from before beginning descent depending on the user’s weight, the rope’s diameter and the terrain. Two supplementary braking spurs allow friction to be increased during descent. A carabiner with a cross section of 12 mm (like an ATTACHE) provides a tight fit in the small hole, creating a «rigid» carabiner / descender unit: stays securely attached to the harness during rope insertion, to help prevent loss, greatly reduces the risk of leverage on the carabiner gate (poor positioning). Designed to be used with the “Rapid” technique, which prevents the formation of a lark’s head knot around the body of the PIRANA and reduces kinks in the rope, without decreasing braking friction. For use on ropes from 8 to 13 mm Designed for single rope Can be used on double ropes, but certain
ALL CLIMBING SALES ARE FINAL. The Rack Descender by Petzl is a variable friction descender for single or double rope which allows the friction to be varied when the descender is under load to adapt to changing conditions (rope weight – terrain – etc). FEATURES of the Rack Descender by Petzl The number of bars engaged on the rope may be adjusted at any time to obtain the desired amount of friction Good distribution of friction and heat helps preserve the rope Does not twist the rope Key features Removable bars Distributes friction and dissipates heat effectively SPECIFICATIONS: Weight: 470 g Materials: stainless steel frame Materials: aluminum bars For use on a single ropes (9 to 13 mm) or double ropes (8 to 11 mm) Rope compatibility: single 9 mm 13 mm Rope compatibility: double 8 mm 11 m Primary use: Rappel device with variable braking position for descending long rope lengths Secondary use(s): Lower heavy loads
FEATURES of the Pirana Descender by Petzl Three different braking positions to select from before beginning a descent Two supplementary braking spurs allow friction to be varied during descent A carabiner with a cross section of 12 mm (e.g. ATTACHE) provides a tight fit in the small hole – creating a «rigid» carabiner / descender unit Stays securely attached to the harness during rope insertion – to help prevent loss Reduces the risk of leverage on the carabiner gate due to poor positioning When used correctly – the PIRANA prevents the formation of a lark’s head hitch around the body and reduces kinks in the rope – without decreasing braking friction SPECIFICATIONS: Weight: 90 g For use with single ropes between 8 and 13 mm in diameter Can be used on double ropes – but certain braking positions may no usable depending on the ropes’ diameter For use with a locking carabiner having a 12 mm cross section 3-year guarantee ALL CLIMBING SALES ARE FINAL.
FEATURES of the Huit Descender by Petzl Square shape to reduce twisting of the ropes and formation of a lark’s head hitch High strength forged aluminum Compact and lightweight Small hole can be used with thin ropes if necessary – or as a belay plate SPECIFICATIONS: Weight: 100 g Material: aluminum Individually tested For use on ropes between 8 and 13 mm in diameter 3-year guarantee ALL CLIMBING SALES ARE FINAL.
FEATURES of the Stop Descender by Petzl Self-braking function allows you to easily stop and maintain your position on rope Device can be rapidly installed or removed from the rope without disconnecting it from the harness May also be used to ascend short distances with the addition of an ascender and foot loop SPECIFICATIONS: Weight: 326 g Materials: steel and aluminum wheels – steel cam – cam and wheels are replaceable if worn out For use with single ropes between 9 and 12 mm in diameter
FEATURES of the Simple Descender by Petzl Very easy to use: the rate of descent is controlled by varying the grip on the free end of the rope Design makes it good for descending tight passages Spring clip allows the rope to be inserted without removing the device from the harness. SPECIFICATIONS: Weight: 240 g Material: aluminum wheels For use with single ropes between 9 and 12 mm in diameter ALL CLIMBING SALES ARE FINAL.
FEATURES of the Huit Antibrulure Descender by Petzl Square shape to reduce twisting of the ropes and formation of a lark’s head hitch High strength forged aluminum Small hole can be used with thin ropes if necessary – or as a belay plate SPECIFICATIONS: Weight: 110 g Material: aluminum frame For use on ropes between 8 and 13 mm in diameter 3-year guarantee ALL CLIMBING SALES ARE FINAL.
The Huit Antibrulure by Petzl is a high strength forged aluminum device for rappelling. This is a figure eight descender with an anti-burn grip. The grip was designed for those times you are rappelling down your rope for long distances or quickly, and the device gets heated up from the friction. Instead of grabbing a hot piece of metal with your bare hands, Petzl has put a rubber piece on the end to pinch and pull to get out of the rappel. A square shape helps to keep your ropes from getting that curly-q twist in it, and a small hole is provided for thin ropes or even can be used as a belay plate if necessary.
BlueWater Rope’s Rappel Glove offers top quality leather with a flexible design permitting ease in rope handling. An affordable alternative for belays and rappelling, these gloves are reinforced in the palm region for extra protection and long life.
The Fuse Belay Device by Mammut is a lightweight safety device that is designed for belaying with single or double ropes, and rappelling. The Fuse has a linear rope lead that avoids entangling and keeps ropes clean.
Sculpted to work smoothly with any belay device, the Mini Pearabiner is light and low in profile. The sleeve locks on the gate, not on the nose, which eliminates the possibility of the biner being over-tightened or “frozen” when loaded. The Mini Pearabiner is an exceptional biner for belaying or rappelling.
Sculpted to work smoothly with any belay device, the Black Diamond Mini Pearabiner is light and low in profile. The sleeve locks on the gate, not on the nose, which eliminates the possibility of the biner being over-tightened or “frozen” when loaded. The Mini Pearabiner is an exceptional biner for belaying or rappelling.
Self-Rescue by David J. Fasulo helps prepare you for sticky situations like assisting another climber past a difficult cection or rappelling down a multi-pitch route with and injured climber. Safety and self-reliance are key components to successful climbing.
FEATURES of the ATC Belay/Rappel Device by Black Diamond Unique – smooth handling geometry Minimalist design is durable in all conditions Large surface area dissipates heat when lowering or rappelling Handles ropes from 7.7 to 11 mm SPECIFICATIONS: Weight: 60 g / 2.1 oz ALL CLIMBING SALES ARE FINAL.
The VaporLock Screwlock Carabiner by Black Diamond is one of the top choices for a belay biner. The VaporLock is the lightest, full function pear locker on the vertical walls. With a smooth increase in friction when used with any belay device, it is ideal for times when you need more control in your device; rappelling or belaying. With a keylock nose and screwlock sleeve, the VaporLock makes it easy to thread through a mass of slings or webbing and lock securely.
The Outdoor Research Alti Gloves are warm, tough gloves which excel at technical climbing in severe cold. The shells are waterproof, and the palms are designed to resist abrasion from rappelling. Stretch panels on the knuckles give you greater mobility when placing gear and handling tools. The liners have fleece palms for superior grip, and synthetic insulation on the backs for compressible warmth.
The BlueWater Rescue 8 is forged and double-anodized for an extra-durable finish. Larger than a regular Figure 8, the Rescue 8 is designed specifically for rappelling and lowering heavier loads in rescue situations. The larger size allows for better heat dissipation and use of larger ropes. The "ears" of the Rescue 8 help control the rope and make it easier to tie off. The Rescue 8 is designed for use only with 1/2" diameter ropes and larger.
The Petzl Shunt is a mechanical replacement for self-jamming knots like the Prusik and the Machard. Positioned below a descender, the Shunt acts as a back-up belay for a rappel descent. It locks onto the rope as soon as you release it and follows your descent when you press on it. For use on single rope (10 to 11 mm) or double (8 to 11 mm).
FEATURES of the VaporLock Screwgate Locking Carabiner by Black Diamond Increases friction up to 30% when lowering or rappelling with an ATC Munter Hitch compatible on ropes up to 9.4 mm Keylock nose prevents snagging Screwgate sleeve SPECIFICATIONS : Weight: 52 g / 1.8 oz Close Gate Strength: 21 kn / 4721 lbf Open Gate Strength: 7 kn / 1574 lbf Minor Axis Strength: 7 kn / 1574 lbf Gate Opening: 20 mm / 0.79 in ALL CLIMBING SALES ARE FINAL.
The Ice Glove by Black Diamond’s compression-molded foam over the fingers and knuckles insulates and protects from bashing swings and heat-stealing ice contact. A snug and sensitive fit comes in handy when you’re placing pro or pumped blind. The waterproof BDry™ shell is constructed with breathable – stretchy schoeller®-Dynamic® shell fabric and grippy Pittards® Armortan® leather palm for increased abrasion resistance when climbing or rappelling. Temperature Range: -17°/-1°C (0°/30°F)
ALL CLIMBING SALES ARE FINAL. The Figure 8 by Omega Pacific remains a popular device for their simplicity – durability and dependability. Forged from aircraft-quality anodized aluminum with 35kN minimum breaking strength provides years of hard use. Can be used with double – half or single rope systems for rappelling or belaying. SPECIFICATIONS of the Figure 8 Belay/Rappel Device by Omega Pacific Weight: 105 grams / 3.7 ounces Strength: 35kN
Description of Metolius Rap HangersDesigned specifically for belay and rappel stations, the Rap Hangers allow the rope to be threaded directly through the anchor for lowering or rappelling; they are unquestionably the best and lowest visual impact anchor out there.Features:For belay and rappel anchorsRadiused rope/carabiner-bearing surface is as wide as a standard carabiner Can be threaded with the rope and lowered from directly Colored powder-coating to blend into the suroundingsBolt hole fits 3/8″ (10 mm) bolts or 1/2″ full-sleeve bolts Strength: 22 kN (4950 lbf)
The Freino Carabiner by Petzl is biner designed exclusively for rappelling on a single rope. Made to connect you and your harness to the descending device, and assists in controlling the speed in which you go down. On one side of the biner there is a clip in point (braking spur) in which you can run the rope through to create more friction. The Freino is an auto-locking carabiner, with a key lock nose and gate, ensuring your absolute safety and efficiency. Click on the sizing chart for a chart from Petzl that gives you more of an idea how this biner works.
The Black Diamond Super 8 is an anodized, super-light and full-size figure 8 that works extremely well when rappelling. The Super 8’s traditional shape allows the rope to smoothly flow with the perfect amount of friction for the task. The Super 8’s design uses thinner diameters on the ends and thicker diameters towards the middle, making it light, durable and functional. For belaying, use the small hole for any size rope up to 11 millimeters. The Super 8 is perfect for climbs involving multiple rappels.
FEATURES of the Freino Carabiner by Petzl Provides increased friction for single ropes when rappelling or lowering – without extra gear or the need to open the carabiner Easy to use: rope can be quickly redirected over the friction spur and removed with one hand Auto-locking Keylock system For use on single ropes with the STOP – GRIGRI – HUIT – HUIT ANTIBRULURE and SIMPLE SPECIFICATIONS: Weight: 85 g Material: hot-forged aluminum 7000 Breaking strength: major axis: 25 kN – open gate: 9 kN – cross-loaded: 10 kN Gate opening: 15 mm (12 mm for wire gate friction spur) 3-year guarantee ALL CLIMBING SALES ARE FINAL.
FEATURES of the Reverso 3 Belay Device by Petzl Ultra-light design: minimalist construction – hot-forged aluminum – weight: 77 g A single device for all rope types: effective braking on half and twin ropes = 7.5 mm – effective braking on single ropes = 8.9 mm – can belay the leader – one or two seconding climbers and can be used for rappelling – independent and simultaneous belaying of one or two seconding climbers in Reverso mode – quick changeovers from Reverso mode to belaying the leader when climbing multi-pitch routes V-shaped friction channels: increased friction on thin ropes – friction is adapted for larger diameter ropes – increases the locking pressure on the ropes in Reverso Mode Asymmetrically grooved sidewalls: increased braking power during a leader or top rope fall or while rappelling – rope smoothly slides through device when taking up slack Carabiner hole to release device when loaded? in Reverso mode: allows the loaded device in Reverso mode to be easily and gradually released with only a carabiner Rope friendly – facilitates belay and rope handling: will not kink the ropes regardless of the mode used – separates the two strands of rope when belaying and rappelling Intuitive use: Reverso mode attachment point is easy to identify – keeper cable keeps the device from moving up the rope when belaying and reduces chances of losing the device – usage diagrams (standard belay and Reverso modes) engraved on device Use with symmetrical shaped locking carabiners (Am’D or OK) to maximize efficiency no matter which end is closest to the device. SPECIFICATIONS: Weight: 77 g Material: Hot forged aluminum body (6082 ALU) For use on: single ropes = 8.9 mm – half ropes = 8 mm – twin ropes = 7.5 mm 3-year guarantee ALL CLIMBING SALES ARE FINAL.
Description of Black Diamond ATC-XP Belay DeviceA true variable-friction device, the ATC-XP maintains the silky-smooth feeding of the ATC but ups the braking power. For belaying and rappelling with 7.7-11 mm ropes, it?s designed with a smooth, low-friction side and a high-friction side with v-shaped grooves for three times more friction. An extended central web keeps biners and ropes properly oriented and helps reduce kinking. Features:Weight: 89 g (3.1 oz)Blue Denim colorSilky-smooth feeding of ATCBetter braking powerigh friction sides has V-shaped grooves for 3 times more frictionExtended central web
Description of Black Diamond VaporLock CarabinerThe lightest, full-function pear locker on the planet, the new VaporLock provides a smooth increase in friction when used with any of our ATC devices. The VaporLock is ideal for those times belaying and rappelling when you want more control. On ropes up to 9.4 mm, the VaporLock is Munter Hitch compatible. A keylock nose and screwlock sleeve make it easy to thread through a rat?s nest of slings and lock securely. Features:Weight: 56 G (2.0 OZ) Closed strength: 25 kN (5620 lbf) Open strength: 8 kN (1798 lbf) Minor axis: 8 kN (1798 lbf)
Description of Petzl GRIGRISelf-braking Belay DeviceDevice for belaying a leader or a second and for single rope descents.Features:Self-braking system: if the rope suddenly comes under tension (e.g. in a fall), the cam pivots to pinch the rope, thus helping the belayer stop the climber’s fall. Usage is similar to that of conventional belay devices: Giving/taking slack is done by using both hands to slide the rope through the device, Falls are held by holding the free end of the rope, For lowering and rappelling, the rate of descent is controlled by the hand holding the free end of the rope (the rope is released with the handle). For ropes of diameters from 10 to 11 mm.225 g.
Description of Mammut Infinity 9.5mm Superdry RopeExtremely light single rope with a very small diameter, the best performance and durability due to the CoatingFinish and Triosafe for added security rappelling and lowering.Features:On-sight and red point climbing, super-light alpine ascents, difficult alpine tours, when every gram counts. Not suitable for work-out climbing and intensive top-roping.UIAA-falls (1 strand 80kg): 6-7Weight / m: 58 gSheath Slippage: 0 mmImpact Force: 9.1 kNElongation with 80 kg: 6.8%Elongation at 1st drop (fall): 29%Proportion of sheath: 40%type of machine: 40
Description of Mountain Hardwear Rappel L/S Tee – Women’sDries fast, feels soft and pulls moisture off your skin. Seams rotated from pressure points and flat lock stitching for comfort. Features:Usage: Climbing / Athletic Weight: 0 lbs, 5 oz / 168.00 g Body: Optimum? Tech Jersey Thumb loops at cuffs Fast drying, wicking, sturdy stretch fabric
BlueWater Rope’s Rappel Glove offers top quality leather with a flexible design permitting ease in rope handling. An affordable alternative for belays and rappelling, these gloves are reinforced in the palm region for extra protection and long life.
BlueWater Rappel Racks are available in both 11″ and 14″ lengths, as well as straight or 90 degree frames. BlueWater recommends using 5 brake bars on the 11″ frame and 6 on the 14″ frame. They also recommend using a grooved brake bar for the top bar. *Brake bars are sold separately. *The Welded Eye frame style is available in a straight model only.
Description of Petzl Cordex Belay/ Rappel GlovesLightweight belay and rappel gloves.Features:Articulated, anatomical cut for superior fitGoat skin leather for excellent dexterityStretch fabric back increases comfort and breathabilityVelcro closure & stretch cuff for easy on and offDoubled leather palm for durabilityCarabiner hole for easy attachment to harness or belt
Description of Petzl Cordex Plus Belay/ Rappel GlovesMidweight belay and rappel gloves.Features:Articulated, anatomical cut for superior fitGoat skin leather for excellent dexterityStretch fabric in key flex areas increase comfort and breathabilityVelcro closure & stretch cuff for easy on and offDoubled leather palm and fingertips for durabilityCarabiner hole for easy attachment to harness or belt
Description of Petzl Verso Belay/Rappel DevicePetzl’s lightest belay/rappel device with Adaptive Rope Control technologyThe VERSO is a simplified version of the REVERSO³ offering a lighter and more compact option for climbers looking to further reduce the weight/size of their rack of gear. The asymmetrical V-shaped grooved friction channels adapt the friction for better control using our ARC (Adaptive Rope Control) technology.Features:Ultra-light design:31 % lighter than the Reverso³Hot-forged aluminumWeight: 57 gSingle ropes = 8.9 mmHalf ropes = 8 mmTwin ropes = 7.5 mmARC technology adapts to the diameter of rope used by increasing or decreasing the braking friction on the rope according to its diameter and conditionsIncreased friction on thinner ropesAdapted friction for efficiency with larger diameter ropesAsymmetrical grooved sidewalls decrease friction when taking in slack for greater ease of useSuper compact design is easy to use and doesn’t take up m
ALL CLIMBING SALES ARE FINAL. With the creation of the BRD by Metolius – we have achieved a simple – safe and bombproof belay/rappel device. The principle behind the BRD is very simple: as the load of a falling climber is applied – the carabiner is pulled into the scientifically engineered rope slots and the rope is squeezed between the carabiner and the BRD. The result is that a tremendous amount of friction is generated – allowing the belayer to easily catch long – hard falls with relatively light hand pressure. For rappelling – the BRD will give you a relatively slow and controlled (and we feel safer) rappel. If the rappel is moving too slowly – you can re-orient the device for a speedier descent. FEATURES of the BRD – Belay Rappel Device by Metolius A versatile – lightweight belay/rappel device w/engineered rope slots which means added control via increased friction on the rope Single or double rope compatible (8 mm to 11 mm ropes) Increased thermal mass and cooling fins to dissipate heat Hard anodized for longer wear CNC machined from 6061 T-6 aluminum Cooling fins to dissipate heat more efficiently Available with or without the Element locking carabiner SPECIFICATIONS: Weight: 2.9 oz. (82 g)
Description of Black Diamond Super 8 Belay/Rappel DeviceFast and easy loading, this classic belay/rappel device uses a unique design that eliminates excess material by thinning out the non-rope bearing areas. The Super 8 has a smooth-wearing soft-anodized surface and works best with double 8.1 mm ropes up to single 11 mm cords. Features:Weight: 87 g (3.1 oz)Smooth-wearing soft-anodized surfaceWorks best with double 8.1 mm ropes up to single 11 mm cords
ALL CLIMBING SALES ARE FINAL. The forged aluminum Rappel Ring by Omega Pacific should be in everyone’s rack for bail-outs and rap stations. Anodized gray for minimal visual impact. Solid construction (not hollow) for 20kN minimum breaking strength (over 4400lbs)! Not intended for repeated lowering. SPECIFICATIONS of the Aluminum Rap Ring by Omega Pacific Weight: 34 grams / 1.2 ounces Strength: 20kN
FEATURES of the ATC Belay/Rappel Device by Black Diamond Unique – smooth handling geometry Minimalist design is durable in all conditions Large surface area dissipates heat when lowering or rappelling Handles ropes from 7.7 to 11 mm SPECIFICATIONS: Weight: 60 g / 2.1 oz ALL CLIMBING SALES ARE FINAL.
New and improved, Omega Pacific’s SBGII is the smoothest & most versatile belay device available! Based on a design by Greg Lowe.By incorporating a rigid stem on this device,climbers can go from full lock-off to whipping rope out in a single, smooth action, no more binding up as the device tries to free itself! And the amount of friction can be completelyadjusted to suit your particular need. Does your climber outweigh you? Are you using skinny ropes? Then set up the brake line through the V-Slots! Clipping in short (into the oblong hole in the center of the stem) adds even more braking power. Climbing with fat ropes, a skinny partner or on low-angle slabs? Then belay off the U-Grooves for less friction and clip into the bottom hole of the SBGII! And if you’ve ever rapped on a single 8mm or 9mm ropes with a traditional belay device, you know what a fast and loose ride that can be! With the SBGII, wrap that skinny cord around the rigid stem and rappel figure-8 style for the ultimate in control and safety.”Unlike the keeper loops that all the other devices in our test utilize, the SBG II features a solid-metal stem, which renders the durability issue moot. The stem has two clip-in points ? one at the end for belaying and rappelling with single ropes, and one in the center for belaying with skinny double ropes. The tube features deep rope-controlling jaws on one side and rounder and feeding-friendly grooves on the other, so you can rig accordingly. The one downside to the SBG II is its complicated feature set ? take time to read the instructions so you get full value.” -Climbing Magazine
ALL CLIMBING SALES ARE FINAL. The SBG II Belay – Rappel Device by Omega Pacific incorporates a rigid stem allowing climbers to go from full lock-off to whipping out rope in a single – smooth action – no more binding up as the device tries to free itself. The amount of friction can be completely adjusted to suit your particular need. Does your climber outweigh you? Are you using skinny ropes? Then set up the brake line through the V-Slots. Clipping in short (into the oblong hole in the center of the stem) adds even more braking power. Climbing with fat ropes – a skinny partner or on low-angle slabs? Then belay off the U-Grooves and clip into the bottom hole of the SBGII for less friction. If you’ve ever rapped on a single 8mm or 9mm rope with other belay devices – you know what a fast and loose ride that can be. With the SBGII – wrap that skinny cord around the rigid stem and rappel – figure-8 style – for the ultimate in control and safety. SPECIFICATIONS of the SBG II Belay / Rappel Device by Omega Pacific Weight: 77 grams / 2.72 ounces Material: Aluminum
ALL CLIMBING SALES ARE FINAL. The Figure 8 by Omega Pacific remains a popular device for their simplicity – durability and dependability. Forged from aircraft-quality anodized aluminum with 35kN minimum breaking strength provides years of hard use. Can be used with double – half or single rope systems for rappelling or belaying. SPECIFICATIONS of the Figure 8 Belay/Rappel Device by Omega Pacific Weight: 105 grams / 3.7 ounces Strength: 35kN
ALL CLIMBING SALES ARE FINAL. The Metolius Men’s Safe Tech Deluxe Harness is designed and built specifically for men – and features a 3-D adjustable-rise system to ensure a perfect fit and shaped 3/8 in. foam that provides optimal support for the lower back. This Metolius climbing harness also features two belay/rappel loops to make setting up for rapples and multi=pitch belays easier – and four gear loops with improved configuration including front loops that pop out for eash racking and rear drop down loops that sit flat when wearing a pack. FEATURES of the Men’s Safe Tech Deluxe Harness by Metolius Designed specifically for men Two belay/rappel loops make setting up for rapples and multi-pitch belays easier Reinforced – Long-wearing tie-in point Four gear loops with improved configuration – Front loops pop-out for easy racking and rear drop down loops sit flat when wearing a pack 3-D adjustable-rise system assures the prefect fit Shaped 3/8 in. foam provides maximum support to the lower back Rear haul loop SPECIFICATIONS for Small: Size: 24-30 in. Diamond pattern body fabric SPECIFICATIONS for Medium: Weight: 19 oz. (539 g) Size: 30-33 in. Diamond pattern body fabric SPECIFICATIONS for Large: Size: 33-37 in. Diamond pattern body fabric SPECIFICATIONS for XL: Size: 37-41 in. Diamond pattern body fabric
Grit and grace, the CORDEX Belay/ Rappel Glove is a double-layer glove that provides maximum dexterity for belaying, rappelling and other activities. Featuring abrasion resistant, breathable stretch nylon keeps your hands cool and comfortable. The hook and loop neoprene cuff features a reinforced caribiner hole for attaching the gloves to your harness.
ALL CLIMBING SALES ARE FINAL. The Metolius Safe Tech All Around Harness is a comfy and super secure climbing harness that features a pair of belay/rappel loops that make setting up for rapples and multi-pitch belays safer and easier. This Metolius climbing harness also has a reinforced – long-wearing tie-in point and four gear loops in an improved configuration – including front loops that pop-out for simple racking and rear drop down loops that sit flat when wearing a pack. FEATURES of the Safe Tech All Around Harness by Metolius Two belay/rappel loops make setting up for rapples and multi-pitch belays easier Reinforced – Long-wearing tie-in point Four gear loops with improved configuration – Front loops pop-out for easy racking and rear drop down loops sit flat when wearing a pack 3-D adjustable-rise system assures the prefect fit for men or women Ergonomically shaped 1/4 in. foam is for unhindered movement Rear haul loop CE/UIAA certified (medium) Diamond pattern body fabric SPECIFICATIONS for XS: Size: 24-27 in. Diamond pattern body fabric SPECIFICATIONS for Small: Size: 24-30 in. Diamond pattern body fabric SPECIFICATIONS for Medium: Weight: 16 oz. (454 g) Size: 30-33 in. Diamond pattern body fabric SPECIFICATIONS for Large: Size: 33-37 in. Diamond pattern body fabric SPECIFICATIONS for XL: Size: 37-41 in. Diamond pattern body fabric
Super tough, the Petzel CORDEX PLUS Belay/ Rappel Glove is a medium weight belay/rappel glovel that offers extra protection without sacrificing dexterity. Double-layer leather and padding protect the palm from heat generated during long rappels or lowers. Fingertips and other high-wear areas are reinforced for increased durability. The back is made of leather with abrasion-resistant stretch nylon at key flex areas. The low profile neoprene cuff with Velcro closure features a reinforced carabiner hole for attaching the gloves to your harness.
The Icebreaker Tech Top is the warmest and best performing thermal bodywear available, offering high performance temperature and moisture regulation for extreme environments. The Tech Top is perfect as a layering piece or used like a sweater. A favorite among the RockCreek staff!
The Tech Wash by Nikwax is a wash-in cleaner made exclusively for waterproof clothing and equipment that works to safely revitalize breathability and water repellency in your gear. The Tech Wash is a non-detergent soap that does not damage Durable Water Repellent coatings and can be used INSTEAD of detergents or washing powder.
The Hiking Trails of North Georgia by Tom Homan is considered the definitive hiking guide to North Georgia. This book will introduce you to one of the most scenic and unspoiled areas in western North Carolina and eastern Tennessee. Completely revised and updated – Expanded to include 124 wilderness trails (23 new trails) with precise, up-to-date directions and 11 area maps. Easy-to-use information boxes, including length, difficulty rating and access. Descriptions of the area?s diverse flora and fauna, with botanical drawings.
Zip Tech™ Zipper Lubricant is designed and formulated to protect and lubricate all types of watertight and airtight zippers. Zip Tech lubricates and protects the zippers and zipper skirts on dry suits, survival suits, environmental suits, dry bags and more. Special ingredients inhibit rust and resist corrosion. Zip Tech helps protect against exposure to harmful chlorine, salt and pollutants. Zip Tech will not flake or jam in extreme temperatures and contains no silicone or paraffin. For best results, preclean with Aquaseal Brand Zip Care™ Zipper Cleaner.
Description of Lib Tech Logo Ball CapTake your loyalty to the next level by supporting Lib Tech on and off the mountain with this Lib Tech Logo Ball cap. Rep’n never looked so good. Features:Flex Fit
BlueWater Rope’s Rappel Glove offers top quality leather with a flexible design permitting ease in rope handling. An affordable alternative for belays and rappelling, these gloves are reinforced in the palm region for extra protection and long life.
Description of Petzl Cordex Belay/ Rappel GlovesLightweight belay and rappel gloves.Features:Articulated, anatomical cut for superior fitGoat skin leather for excellent dexterityStretch fabric back increases comfort and breathabilityVelcro closure & stretch cuff for easy on and offDoubled leather palm for durabilityCarabiner hole for easy attachment to harness or belt
BlueWater Rappel Racks are available in both 11″ and 14″ lengths, as well as straight or 90 degree frames. BlueWater recommends using 5 brake bars on the 11″ frame and 6 on the 14″ frame. They also recommend using a grooved brake bar for the top bar. *Brake bars are sold separately. *The Welded Eye frame style is available in a straight model only.
Description of Petzl Cordex Plus Belay/ Rappel GlovesMidweight belay and rappel gloves.Features:Articulated, anatomical cut for superior fitGoat skin leather for excellent dexterityStretch fabric in key flex areas increase comfort and breathabilityVelcro closure & stretch cuff for easy on and offDoubled leather palm and fingertips for durabilityCarabiner hole for easy attachment to harness or belt
Description of Petzl Verso Belay/Rappel DevicePetzl’s lightest belay/rappel device with Adaptive Rope Control technologyThe VERSO is a simplified version of the REVERSO³ offering a lighter and more compact option for climbers looking to further reduce the weight/size of their rack of gear. The asymmetrical V-shaped grooved friction channels adapt the friction for better control using our ARC (Adaptive Rope Control) technology.Features:Ultra-light design:31 % lighter than the Reverso³Hot-forged aluminumWeight: 57 gSingle ropes = 8.9 mmHalf ropes = 8 mmTwin ropes = 7.5 mmARC technology adapts to the diameter of rope used by increasing or decreasing the braking friction on the rope according to its diameter and conditionsIncreased friction on thinner ropesAdapted friction for efficiency with larger diameter ropesAsymmetrical grooved sidewalls decrease friction when taking in slack for greater ease of useSuper compact design is easy to use and doesn’t take up m
ALL CLIMBING SALES ARE FINAL. With the creation of the BRD by Metolius – we have achieved a simple – safe and bombproof belay/rappel device. The principle behind the BRD is very simple: as the load of a falling climber is applied – the carabiner is pulled into the scientifically engineered rope slots and the rope is squeezed between the carabiner and the BRD. The result is that a tremendous amount of friction is generated – allowing the belayer to easily catch long – hard falls with relatively light hand pressure. For rappelling – the BRD will give you a relatively slow and controlled (and we feel safer) rappel. If the rappel is moving too slowly – you can re-orient the device for a speedier descent. FEATURES of the BRD – Belay Rappel Device by Metolius A versatile – lightweight belay/rappel device w/engineered rope slots which means added control via increased friction on the rope Single or double rope compatible (8 mm to 11 mm ropes) Increased thermal mass and cooling fins to dissipate heat Hard anodized for longer wear CNC machined from 6061 T-6 aluminum Cooling fins to dissipate heat more efficiently Available with or without the Element locking carabiner SPECIFICATIONS: Weight: 2.9 oz. (82 g)
Description of Black Diamond Super 8 Belay/Rappel DeviceFast and easy loading, this classic belay/rappel device uses a unique design that eliminates excess material by thinning out the non-rope bearing areas. The Super 8 has a smooth-wearing soft-anodized surface and works best with double 8.1 mm ropes up to single 11 mm cords. Features:Weight: 87 g (3.1 oz)Smooth-wearing soft-anodized surfaceWorks best with double 8.1 mm ropes up to single 11 mm cords
ALL CLIMBING SALES ARE FINAL. The forged aluminum Rappel Ring by Omega Pacific should be in everyone’s rack for bail-outs and rap stations. Anodized gray for minimal visual impact. Solid construction (not hollow) for 20kN minimum breaking strength (over 4400lbs)! Not intended for repeated lowering. SPECIFICATIONS of the Aluminum Rap Ring by Omega Pacific Weight: 34 grams / 1.2 ounces Strength: 20kN
Description of Mountain Hardwear Rappel L/S Tee – Women’sDries fast, feels soft and pulls moisture off your skin. Seams rotated from pressure points and flat lock stitching for comfort. Features:Usage: Climbing / Athletic Weight: 0 lbs, 5 oz / 168.00 g Body: Optimum? Tech Jersey Thumb loops at cuffs Fast drying, wicking, sturdy stretch fabric
Grit and grace, the CORDEX Belay/ Rappel Glove is a double-layer glove that provides maximum dexterity for belaying, rappelling and other activities. Featuring abrasion resistant, breathable stretch nylon keeps your hands cool and comfortable. The hook and loop neoprene cuff features a reinforced caribiner hole for attaching the gloves to your harness.
FEATURES of the ATC Belay/Rappel Device by Black Diamond Unique – smooth handling geometry Minimalist design is durable in all conditions Large surface area dissipates heat when lowering or rappelling Handles ropes from 7.7 to 11 mm SPECIFICATIONS: Weight: 60 g / 2.1 oz ALL CLIMBING SALES ARE FINAL.
New and improved, Omega Pacific’s SBGII is the smoothest & most versatile belay device available! Based on a design by Greg Lowe.By incorporating a rigid stem on this device,climbers can go from full lock-off to whipping rope out in a single, smooth action, no more binding up as the device tries to free itself! And the amount of friction can be completelyadjusted to suit your particular need. Does your climber outweigh you? Are you using skinny ropes? Then set up the brake line through the V-Slots! Clipping in short (into the oblong hole in the center of the stem) adds even more braking power. Climbing with fat ropes, a skinny partner or on low-angle slabs? Then belay off the U-Grooves for less friction and clip into the bottom hole of the SBGII! And if you’ve ever rapped on a single 8mm or 9mm ropes with a traditional belay device, you know what a fast and loose ride that can be! With the SBGII, wrap that skinny cord around the rigid stem and rappel figure-8 style for the ultimate in control and safety.”Unlike the keeper loops that all the other devices in our test utilize, the SBG II features a solid-metal stem, which renders the durability issue moot. The stem has two clip-in points ? one at the end for belaying and rappelling with single ropes, and one in the center for belaying with skinny double ropes. The tube features deep rope-controlling jaws on one side and rounder and feeding-friendly grooves on the other, so you can rig accordingly. The one downside to the SBG II is its complicated feature set ? take time to read the instructions so you get full value.” -Climbing Magazine
ALL CLIMBING SALES ARE FINAL. The SBG II Belay – Rappel Device by Omega Pacific incorporates a rigid stem allowing climbers to go from full lock-off to whipping out rope in a single – smooth action – no more binding up as the device tries to free itself. The amount of friction can be completely adjusted to suit your particular need. Does your climber outweigh you? Are you using skinny ropes? Then set up the brake line through the V-Slots. Clipping in short (into the oblong hole in the center of the stem) adds even more braking power. Climbing with fat ropes – a skinny partner or on low-angle slabs? Then belay off the U-Grooves and clip into the bottom hole of the SBGII for less friction. If you’ve ever rapped on a single 8mm or 9mm rope with other belay devices – you know what a fast and loose ride that can be. With the SBGII – wrap that skinny cord around the rigid stem and rappel – figure-8 style – for the ultimate in control and safety. SPECIFICATIONS of the SBG II Belay / Rappel Device by Omega Pacific Weight: 77 grams / 2.72 ounces Material: Aluminum
ALL CLIMBING SALES ARE FINAL. The Figure 8 by Omega Pacific remains a popular device for their simplicity – durability and dependability. Forged from aircraft-quality anodized aluminum with 35kN minimum breaking strength provides years of hard use. Can be used with double – half or single rope systems for rappelling or belaying. SPECIFICATIONS of the Figure 8 Belay/Rappel Device by Omega Pacific Weight: 105 grams / 3.7 ounces Strength: 35kN
Super tough, the Petzel CORDEX PLUS Belay/ Rappel Glove is a medium weight belay/rappel glovel that offers extra protection without sacrificing dexterity. Double-layer leather and padding protect the palm from heat generated during long rappels or lowers. Fingertips and other high-wear areas are reinforced for increased durability. The back is made of leather with abrasion-resistant stretch nylon at key flex areas. The low profile neoprene cuff with Velcro closure features a reinforced carabiner hole for attaching the gloves to your harness.
In the decade since its original publication, On Rope has gained worldwide recognition as the most authoritative book on single rope techniques (SRT). Like its predecessor, this new edition is a practical approach to North American vertical ropework — it contains 382 pages with over 700 detailed drawings. Home workshops are included to show you how to assemble your own ascending and descending gear. This book covers everything you need to know about the techniques and equipment needed for vertical work — including ropes, knots, rigging, harnesses, rappelling, ascending, and belaying — as well as a detailed program for training and practicing ropework skills.Equally significant to both the beginner and the experienced user of vertical rope techniques, this new edition is completely updated and expanded to include other users such as arborists, river rescue, window cleaners, and circus riggers among others.
The 10mm Supernova Rope by Mammut is an incredibly well made dynamic rope that is perfect for beginners to seasoned climbers alike. Mammut starts by using only the most high quality Polyamide nylon for the production of their ropes, and their exclusive coating finish process coats each individual rope strand with the highly durable Teflon in order to reduce chafing and improve friction co-efficiency. Mammut’s ropes all have middle marking for easy view of the center of your rope, great for rappelling or noting how much rope is left when on a multi-pitch. Besides just getting an awesome rope, Mammut is also throwing in a rope bag with a super big tarp to keep your rope and gear on when climbing. A rope bag is key to keeping the life of your rope at its optimal performance.
Description of Mammut Infinity 9.5mm Superdry RopeExtremely light single rope with a very small diameter, the best performance and durability due to the CoatingFinish and Triosafe for added security rappelling and lowering.Features:On-sight and red point climbing, super-light alpine ascents, difficult alpine tours, when every gram counts. Not suitable for work-out climbing and intensive top-roping.UIAA-falls (1 strand 80kg): 6-7Weight / m: 58 gSheath Slippage: 0 mmImpact Force: 9.1 kNElongation with 80 kg: 6.8%Elongation at 1st drop (fall): 29%Proportion of sheath: 40%type of machine: 40
The Mammut Supersafe Rope is as innovative as it gets when it comes to making sure your climbing experience is safe and injury free. Due to the Teflon coated fibers which reduces internal friction, the Supersafe rope will be less likely to core shot during big falls and will maintain flexbility and easy handling in whatever situation you are climbing in. The Supersafe is also Superdry treated so it will not absorb water, making it stronger and less resistant to wear and tear. Super durable, incredibly strong and coated to prevent water damage. To help prevent rappelling accidents or lowering off the end of the rope, there is a Triosafe color marking in the middle and 5 meters from each end. The last 5-7 meters of the rope are the danger zone.
The BlueWater II +Plus, the rope that made BlueWater what it is today. The BlueWater II +Plus is the standard for use in caving, rappelling and rescue applications. Its design of double twist cabled sheath strands as well as double twist cabled core strands is truly the most unique and exacting rope design anywhere. These factors make it the best all around choice in a static/low elongation rope. If you require NFPA certified ropes take a look at the SafeLine and ProTac series of ropes. *There is a $5 extra shipping fee due to the extra cost of shipping a heavy package. Rock/Creek pays the remainder of the shipping fee which averages about $10 to most locations.
FEATURES of the Rope Bucket by Petzl Pack remains upright and has an exterior folding lid system that allows easy access to the contents of the bag External zippered pocket for personal effects Transparent external window for sliding an equipment identification card Two large – comfortable carrying handles Adjustable webbing for carrying bandolier style Interior ring can be used as attachment point for rope Bottom is lined for longer wear Waterproof fabric SPECIFICATIONS for 25 Liters: Weight: 525 g Height: 38 cm SPECIFICATIONS for 35 Liters: Weight: 630 g Height: 53 cm ALL CLIMBING SALES ARE FINAL.
BlueWater Rope’s Rappel Glove offers top quality leather with a flexible design permitting ease in rope handling. An affordable alternative for belays and rappelling, these gloves are reinforced in the palm region for extra protection and long life.
The Fuse Belay Device by Mammut is a lightweight safety device that is designed for belaying with single or double ropes, and rappelling. The Fuse has a linear rope lead that avoids entangling and keeps ropes clean.
When every gram counts, the Mammut 9.5 Infinity Duodess Climbing Rope is ideal for on-sight and red point climbing, super-light alpine ascents, and difficult alpine ascents. This extremely light single rope with small diameter provides superior performance and durability due to its COATINGfinishtreatment that provides protection against water and dirt, DuraFlex heat-treatment process that maintains smooth handling characteristics, and Triosafe midpoint and end marking for added security during rappelling and lowering. This rope slides through pro like butter, but is not suitable for work-out climbing and intensive top-roping.
Ideal for classic alpine ascents and gym climbing, the Mammut 9.8 Tusk Duodess Superdry Climbing Rope features a superDRY finish that gives it incredible durability, ease of handling and protects against water and dirt. With relatively small diameter and DuraFlex heat-treatment process that maintains smooth handling characteristics, its patterned Triosafe midpoint and end marking add security during rappelling and lowering. The 9.8 Tusk Duodess Superdry slides through pro like butter, and offers a very wide range of uses.
A long standing institution, the Mammut 10.0 Galaxy Duodess Superdry Climbing Rope maintains its reputation for smooth handling, light weight and superb durability. A mainstay in the line for ten years, the Galaxy is a favorite all-around rope for climbers around the globe. The Superdry sheath and core treatment discourages water absorption, resists dirt and abrasion during big mountain climbs, while its patterned Triosafe midpoint and end marking add security during rappelling and lowering. With ultrasonic-sealed rope ends, to prevent sheath slippage, the Galaxy Duodess Superdry is strong enough to stand up to the abuse of sport climbing, yet light enough for long alpine routes; this Mammut lifeline is a truly versatile rope.
Description of Petzl GRIGRISelf-braking Belay DeviceDevice for belaying a leader or a second and for single rope descents.Features:Self-braking system: if the rope suddenly comes under tension (e.g. in a fall), the cam pivots to pinch the rope, thus helping the belayer stop the climber’s fall. Usage is similar to that of conventional belay devices: Giving/taking slack is done by using both hands to slide the rope through the device, Falls are held by holding the free end of the rope, For lowering and rappelling, the rate of descent is controlled by the hand holding the free end of the rope (the rope is released with the handle). For ropes of diameters from 10 to 11 mm.225 g.
ALL CLIMBING SALES ARE FINAL. Accessory cords by Sterling come in a wide range of diameters and color options that make them extremely versatile for climbing – recreation – rescue – and utility applications. Although many take accessory cord quality for granted – there is a difference between cords. Sterling’s cord is unique and we believe better in many ways. First – we offer one of the largest collections of stocked colors in the industry. Second – we twist the sheath yarn which makes our cords last longer. These factors give end-users and original equipment manufacturers (OEM) an endless variety of cords that are functional – durable – and even fashionable.
Description of Metolius Rap HangersDesigned specifically for belay and rappel stations, the Rap Hangers allow the rope to be threaded directly through the anchor for lowering or rappelling; they are unquestionably the best and lowest visual impact anchor out there.Features:For belay and rappel anchorsRadiused rope/carabiner-bearing surface is as wide as a standard carabiner Can be threaded with the rope and lowered from directly Colored powder-coating to blend into the suroundingsBolt hole fits 3/8″ (10 mm) bolts or 1/2″ full-sleeve bolts Strength: 22 kN (4950 lbf)
The Rope Ranger Rope Bag by Metolius is designed with a larger carrying capacity for bringing your 60m and 70m ropes to wherever it is you are climbing that day. A 4′ x 5′ tarp is integrated into the bag so you can flake your rope onto it, roll it up and carry it out, all the while protecting your cord from dirt and debris. Also a great place to shoe up and stretch before you ascend. A new improved draw-cord closure eliminates grommet failure and dual padded shoulder straps allow backpack style carrying for easy load hauling. The Rope Ranger is a bigger, badder version of the Ropemaster and can be used as a pack to put all your gear in if you aren’t the one who has to carry the rope.
Description of Petzl Stop DescenderOriginally designed for caving, the Petzl Stop Descender is a device that stops or considerably slows descent when the handle is released Locking mechanism can be disabled with a carabiner when a hand is needed to negotiate a drop Handle is squeezed to descend normally, controlling speed with the other hand; slack rope can easily be taken up All control surfaces are stainless steel Works best with clean, flexible rope, stiff rope may result in greatly impaired or reduced friction and the stop feature may be inoperative.Features:Weight: 326 gramsFits rope sizes: 9 – 12 millimetersSuitable for belaying: No Suitable for rappelling: Yes
Get rid of the dirt and grime that are major enemies of your rope with the Rope Cleanser by Bluewater. Washing your rope will allow you to get the maximum service life from your rope. This is a simple, safe cleaning solution designed specifically for cleaning nylon and polyester.
Description of Sterling Rope Evolution Velocity DryThis 9.8mm rope has it all and is Sterling Rope’s most popular of the Evolution series. Just the right amount of stiffness, so your rope doesn’t flop during critical clips and its silky smooth sheath withstands abrasion and slides effortlessly to reduce rope drag. This is the rope of choice for Chris Sharma and is what he uses for working the toughest routes.Features:Dynamic Elongation: 26.4%Impact Force: 8.8kNStatic Elongation: 8.6%UIAA falls: 6Weight: 62 g/M
The 10.4 Biathlon Sport Rope by Sterling is the Bi-color version of the Marathon Sport. According to studies done by Sterling, marking the center of your rope with a felt tipped marker or other commercial ink can decrease up to 50% of the rope strength – or the energy absorption capacity of your rope. Designed for cragging, alpine routes and even big walls, the Biathlon Sport Rope is one of the more versatile ropes in Sterling’s line-up. With two distinct patterns on each half of the rope, it is easy to find the middle, helping you in all sorts of climbing situations.Constructed to be lighter, and incredibly durable with its beefy braiding technology and easy handling, the Biathlon Sport Rope should be a part of any serious climber’s arsenal of gear.
The 9.8mm Evolution Velocity Dynamic Rope by Sterling is part of their Evolution Series of ropes. This is a rope that is lightweight, but can take multiple impact forces with high fall ratings. Bottom line, a light rope that can take a heck of a beating for an extended period of time. The Velocity has been constructed with a new sheath and core construction giving you an incredibly durable rope with half the weight of a higher diameter. The Velocity also excels at zero drag over rock and caribiners, and clips with enough stiffness, you can be assured you won’t get that classic rope flop. All in all, the Velocity is the perfect rope for onsights, redpoints or long routes where you need a rope that can glide over surfaces without getting caught and will clip like a dream.
FEATURES of the Grigri Belay Devic by Petzl Assisted braking system: if the rope suddenly comes under tension (e.g. in a fall) – the cam pivots to pinch the rope – thus helping the belayer stop the climber’s fall Usage is similar to that of conventional belay devices: paying out rope is done using both hands – arresting a fall is done by holding the free end of the rope – for lowering and rappelling – the rate of descent is controlled by the hand holding the free end of the rope (the rope is released with the handle). SPECIFICATIONS: Weight: 225 g Material: aluminum side plates – stainless steel cam and friction plate – reinforced nylon lever arm For use with single ropes between 10 and 11 mm in diameter 3-year guarantee ALL CLIMBING SALES ARE FINAL.
The Mammut Rope Bag Pro is a durable, spacious rope bag with generous room for flaking when open. The Rope Bag Pro is much like the regular Rope Bag but it has a soft, padded shoulder strap. For those quick, after work climbing days, throw your bag over your shoulder, have your rope ready, and climb til dark.
The 10.7 Dynamic Urban Rope is a specially made rope just for Rock/Creek by Sterling Ropes. The new, locally owned gym Urban Rocks, inspired us to name our custom rope, and is actually made just for gym use. Cut to fit climbing walls height and nothing more, the 10.7 Urban Rope is only 30 meters /100 feet long. Leave your outdoor rope at home where it belongs, and take your Urban rope to the gym so it can take the falls you will give it.Besides being a custom rope, the Urban has an ultra-durable sheath and is easy to clip when leading indoors. The diversity of indoor climbing settings creates some of the most abusive conditions for climbing ropes. The wide range of wall styles, belay and anchor systems, plus the endless amount of lowering, falling, and friction on the ropes create additional wear issues. This is a limited quantity rope so once we run out there will be no more and the Urban Rope is now being offered at a great price until they are gone.
Description of Sterling Rope 11mm SafetyPro RopeThe workhorse of the SafetyPro series, the 11mm offers a smooth tight sheath which allows the rope to run smoothly through gear. A technical work and rescue line, manufactured to meet the EN standards, also passes NFPA standards for light use. This rope is great option for mountain rescue or rope access.Features:100% nylon low stretch kernmantleGreat for SAR teams, fire departments, SRT teams and militaryExcellent for climbing big wall and expedition fixingCertified to NFPA 1983, 2006 Life Safety Rope – Light useNote: tracer colors are subject to change.Diameter: 11mmElongation 50 kg to 150 kg: 3%EN 1891 Type: AImpact force@fall factor 0.3: 5.8kNNFPA_1983, 2006 certified: Light useNumber of factor 1 falls: >5Sheath percentage: 40.90%Sheath slippage: 0.60%Shrinkage in water: 2.50%Static strength: 35.7kNStatic Strength with figure 8 knot: 23.4kNWeight per meter: 76.6 g/M
The BlueWater Rescue 8 is forged and double-anodized for an extra-durable finish. Larger than a regular Figure 8, the Rescue 8 is designed specifically for rappelling and lowering heavier loads in rescue situations. The larger size allows for better heat dissipation and use of larger ropes. The "ears" of the Rescue 8 help control the rope and make it easier to tie off. The Rescue 8 is designed for use only with 1/2" diameter ropes and larger.
The Rope Bag by Kavu is a messenger type bag that comes with 2 seperate vertical zip entry pockets and 2 zip pockets for keys or phones. The Rope Bag has a padded back with KAVU outline embroidery. The rope strap is adjustable to fit a variety of sizes.
The Rocky Rope Mat by CAMP is designed to be used with the Rox Climbing Pack. It contains a large pocket to roll the rope in and four different colored tie-in points on the corners. A great accessory to carrying your rope to keep it free of debris and dirt.
The Rope Proof by Nikwax is a wash-in waterproofing for synthetic ropes. Using this maintains your rope’s strength, adds water repellency, and reduces weight gain in wet weather.
The Fuse Belay Device by Mammut is a lightweight safety device that is designed for belaying with single or double ropes, and rappelling. The Fuse has a linear rope lead that avoids entangling and keeps ropes clean.
Description of Petzl Reverso³ Belay DeviceUltra light, multi-purpose belay/rappel device, with range of friction adapted to different ropeThis multi-purpose belay/rappel device is lightweight and easy to use. The asymmetric V-shaped grooved friction channels regulate the amount of braking friction on the rope according to its diameter and condition.Features:Ultra-light designMinimalist construction Hot-forged aluminum 72 g A single device for all rope types Effective braking on half and twin ropes = 7,5 mm Effective braking on single ropes = 8,9 mm Can belay the leader, one or two seconding climbers and can be Used for rappelling Independent and simultaneous belaying of one or two seconding climbers in Reverso mode Quick change-overs from Reverso mode to belaying the leader when climbing multi-pitch routes V-shaped friction channels Increased friction on thin ropes Friction is adapted for larger diameter ropes Increased holding power in Reverso mode Asym
Grit and grace, the CORDEX Belay/ Rappel Glove is a double-layer glove that provides maximum dexterity for belaying, rappelling and other activities. Featuring abrasion resistant, breathable stretch nylon keeps your hands cool and comfortable. The hook and loop neoprene cuff features a reinforced caribiner hole for attaching the gloves to your harness.
The Cinch Belay Device by Trango is the latest in a long line of innovative belay devices introduced by Trango. We designed it with an eye for function – aesthetics and simplicity (It’s about as complicated as a door hinge.) so it offers up a secure belay for UIAA/CE certified single ropes. On smaller diameter ropes – or when holding falls that generate extremely high loads (In excess of factor 1) the Cinch acts dynamically – reducing shock loads to the belay system. In addition it will release easily and modulate fluidly while you’re rappelling or lowering off. The Cinch feeds rope easier than any other device – fits nicely in your hand and weighs 182gm. SPECIFICATIONS of the Cinch Belay Device by Trango Weight: 182gm / 6.42o Recommended Single Rope Diameter: 9.4 – 11mm Use with caution on ropes 9.4mm Do not use with half or twin ropes CE ALL CLIMBING SALES ARE FINAL.
An ultra light, multi-purpose belay/rappel tool, the Petzl Reverso 3 Belay Device provides a wide range of friction that manages variable rope sizes and uses. Lightweight and easy to use, the asymmetric V-shaped grooved friction channels regulate the amount of braking friction on the rope according to its diameter and conditions. The Reverso 3 provides effective braking on half and twin ropes to 7.5 mm, and effective braking on single ropes to 8.9 mm. To enhance team logistics this device can belay the leader, one or two seconding climbers, independent and simultaneous belaying of one or two seconding climbers, and can be used for rappelling. This tool also allows for quick change-over from Reverso mode to belaying the leader when climbing multi-pitch routes.
FEATURES of the ATC Belay/Rappel Device by Black Diamond Unique – smooth handling geometry Minimalist design is durable in all conditions Large surface area dissipates heat when lowering or rappelling Handles ropes from 7.7 to 11 mm SPECIFICATIONS: Weight: 60 g / 2.1 oz ALL CLIMBING SALES ARE FINAL.
FEATURES of the Reverso 3 Belay Device by Petzl Ultra-light design: minimalist construction – hot-forged aluminum – weight: 77 g A single device for all rope types: effective braking on half and twin ropes = 7.5 mm – effective braking on single ropes = 8.9 mm – can belay the leader – one or two seconding climbers and can be used for rappelling – independent and simultaneous belaying of one or two seconding climbers in Reverso mode – quick changeovers from Reverso mode to belaying the leader when climbing multi-pitch routes V-shaped friction channels: increased friction on thin ropes – friction is adapted for larger diameter ropes – increases the locking pressure on the ropes in Reverso Mode Asymmetrically grooved sidewalls: increased braking power during a leader or top rope fall or while rappelling – rope smoothly slides through device when taking up slack Carabiner hole to release device when loaded? in Reverso mode: allows the loaded device in Reverso mode to be easily and gradually released with only a carabiner Rope friendly – facilitates belay and rope handling: will not kink the ropes regardless of the mode used – separates the two strands of rope when belaying and rappelling Intuitive use: Reverso mode attachment point is easy to identify – keeper cable keeps the device from moving up the rope when belaying and reduces chances of losing the device – usage diagrams (standard belay and Reverso modes) engraved on device Use with symmetrical shaped locking carabiners (Am’D or OK) to maximize efficiency no matter which end is closest to the device. SPECIFICATIONS: Weight: 77 g Material: Hot forged aluminum body (6082 ALU) For use on: single ropes = 8.9 mm – half ropes = 8 mm – twin ropes = 7.5 mm 3-year guarantee ALL CLIMBING SALES ARE FINAL.
The B-52 Belay Device by Trango has been recently updated. The B-52 is the first belay device designed from a total performance point-of-view and with the refinements we’ve made recently – its even better. We’ve beefed up the small end of the device or added durability and subtly rounded the edges and curves making it even smoother to operate. Rappelling with the B-52 is a thing of beauty. We’ve all gotten used to the jerky-at-the top/terrifying-at-the-bottom rappel sequence offered up by most belay/rappel devices. The B-52 changes all that with extremely smooth starts and controlled descents all the way down. For advanced climbers and guides doing multi-pitch routes – the B-52 can be used as an in.autobloc in. device that will lock the rope automatically when the leader is belaying one or two seconds. In a pinch – the B-52 can be used as an emergency ascender. FEATURES of the B-52 Belay Device by Trango Positive stop with a wide variety of rope diameters Lightweight Emergency ascender Blissfully smooth rappels with all your different ropes Autobloc Easy to rig SPECIFICATIONS: Weight: 2.5 oz/ 71 g Strength: 23 kN ALL CLIMBING SALES ARE FINAL.
FEATURES of the Grigri Belay Devic by Petzl Assisted braking system: if the rope suddenly comes under tension (e.g. in a fall) – the cam pivots to pinch the rope – thus helping the belayer stop the climber’s fall Usage is similar to that of conventional belay devices: paying out rope is done using both hands – arresting a fall is done by holding the free end of the rope – for lowering and rappelling – the rate of descent is controlled by the hand holding the free end of the rope (the rope is released with the handle). SPECIFICATIONS: Weight: 225 g Material: aluminum side plates – stainless steel cam and friction plate – reinforced nylon lever arm For use with single ropes between 10 and 11 mm in diameter 3-year guarantee ALL CLIMBING SALES ARE FINAL.
Description of Black Diamond ATC-XP Belay DeviceA true variable-friction device, the ATC-XP maintains the silky-smooth feeding of the ATC but ups the braking power. For belaying and rappelling with 7.7-11 mm ropes, it?s designed with a smooth, low-friction side and a high-friction side with v-shaped grooves for three times more friction. An extended central web keeps biners and ropes properly oriented and helps reduce kinking. Features:Weight: 89 g (3.1 oz)Blue Denim colorSilky-smooth feeding of ATCBetter braking powerigh friction sides has V-shaped grooves for 3 times more frictionExtended central web
ALL CLIMBING SALES ARE FINAL. With the creation of the BRD by Metolius – we have achieved a simple – safe and bombproof belay/rappel device. The principle behind the BRD is very simple: as the load of a falling climber is applied – the carabiner is pulled into the scientifically engineered rope slots and the rope is squeezed between the carabiner and the BRD. The result is that a tremendous amount of friction is generated – allowing the belayer to easily catch long – hard falls with relatively light hand pressure. For rappelling – the BRD will give you a relatively slow and controlled (and we feel safer) rappel. If the rappel is moving too slowly – you can re-orient the device for a speedier descent. FEATURES of the BRD – Belay Rappel Device by Metolius A versatile – lightweight belay/rappel device w/engineered rope slots which means added control via increased friction on the rope Single or double rope compatible (8 mm to 11 mm ropes) Increased thermal mass and cooling fins to dissipate heat Hard anodized for longer wear CNC machined from 6061 T-6 aluminum Cooling fins to dissipate heat more efficiently Available with or without the Element locking carabiner SPECIFICATIONS: Weight: 2.9 oz. (82 g)
The Pyramid Belay Device by Trango could be the best all around belay/rappel device on the planet. The result of intensive R and D work – it is light – compact – durable and can smoothly handle just about any rope combination. The machined cooling fins on the Pyramid work both to keep it cool and to make it less droppable – and the pivoting center pin lets you flip it over to customize the feed of your ropes without effecting its stopping power. Rappelling is always controlled and jerk-free and the flat rope path virtually eliminates kinks. The elongated slot for the center pin makes it easy to rig the Pyramid with stiff or fat ropes and the burly retaining cable will last as long as you own it. SPECIFICATIONS of the Pyramid Belay Device by Trango Weight: 68 gm (2.4 oz) Recommended Rope Diameters: Twin Ropes: Not recommended Recommended Rope Diameters: Half Ropes: 8.5mm Recommended Rope Diameters: Single Ropes: 9.7 – 11mm ALL CLIMBING SALES ARE FINAL.
ALL CLIMBING SALES ARE FINAL. The Figure 8 by Omega Pacific remains a popular device for their simplicity – durability and dependability. Forged from aircraft-quality anodized aluminum with 35kN minimum breaking strength provides years of hard use. Can be used with double – half or single rope systems for rappelling or belaying. SPECIFICATIONS of the Figure 8 Belay/Rappel Device by Omega Pacific Weight: 105 grams / 3.7 ounces Strength: 35kN
New and improved, Omega Pacific’s SBGII is the smoothest & most versatile belay device available! Based on a design by Greg Lowe.By incorporating a rigid stem on this device,climbers can go from full lock-off to whipping rope out in a single, smooth action, no more binding up as the device tries to free itself! And the amount of friction can be completelyadjusted to suit your particular need. Does your climber outweigh you? Are you using skinny ropes? Then set up the brake line through the V-Slots! Clipping in short (into the oblong hole in the center of the stem) adds even more braking power. Climbing with fat ropes, a skinny partner or on low-angle slabs? Then belay off the U-Grooves for less friction and clip into the bottom hole of the SBGII! And if you’ve ever rapped on a single 8mm or 9mm ropes with a traditional belay device, you know what a fast and loose ride that can be! With the SBGII, wrap that skinny cord around the rigid stem and rappel figure-8 style for the ultimate in control and safety.”Unlike the keeper loops that all the other devices in our test utilize, the SBG II features a solid-metal stem, which renders the durability issue moot. The stem has two clip-in points ? one at the end for belaying and rappelling with single ropes, and one in the center for belaying with skinny double ropes. The tube features deep rope-controlling jaws on one side and rounder and feeding-friendly grooves on the other, so you can rig accordingly. The one downside to the SBG II is its complicated feature set ? take time to read the instructions so you get full value.” -Climbing Magazine
FEATURES of the Verso Belay Device by Petzl ARC technology adapts to the diameter of rope used by increasing or decreasing the braking friction on the rope according to its diameter and conditions Increased friction on thinner ropes Adapted friction for efficiency with larger diameter ropes Asymmetrical grooved sidewalls decrease friction when taking in slack for greater ease of use Super compact design is easy to use and doesn’t take up much space on your rack Rope friendly design separates the two strands of rope when belaying with half/twin ropes or while rappelling thus helping to prevents kinks Stiff keeper cable will not get sucked into the device – helps maintain the optimal position during use – and aids in preventing loss during transitions Usage diagram engraved on device for ease of use Use with symmetrical shaped locking carabiners (Am’D or OK) to maximize efficiency no matter which end is closest to the device. SPECIFICATIONS: Weight: 77 g Material: Hot forged aluminum body (6082 ALU) Ultra-light design: 31% lighter than the Reverso 3 – hot-forged aluminum – Weight: 57 g For use on: single ropes = 8.9 mm – half ropes = 8 mm – twin ropes = 7.5 mm 3-year guarantee ALL CLIMBING SALES ARE FINAL.
The Black Diamond Super 8 is an anodized, super-light and full-size figure 8 that works extremely well when rappelling. The Super 8’s traditional shape allows the rope to smoothly flow with the perfect amount of friction for the task. The Super 8’s design uses thinner diameters on the ends and thicker diameters towards the middle, making it light, durable and functional. For belaying, use the small hole for any size rope up to 11 millimeters. The Super 8 is perfect for climbs involving multiple rappels.
Description Of Mammut 19mm Belay SlingClassically constructed alpine backpack with special ski touring equipment, including easy-access front pocket for avalanche safety equipment and skins. Has wide, adjustable ski attachment loops on the side and removable front straps for fastening e.g. snowshoes. Ideal for tours of one or more days.This self-belay sling with patented construction sling gives you a great overview and maximum security on your belay stance or when rapelling. Tested according to EN 566.Features:Width – 19mmLength – 90cm or 65cm
The Smart Belay Device by Mammut has been specially desgined to meet the needs of the constantly growing group of indoor and sport climbers. It dynamically brakes the climber in an accidental fall and locks even at low levels of force exerted by the user. In situations where the user has a sudden shock, the Smart Belay device corresponds to the reflex movements of the human body. Suitable for all current HMS carabiners and simple ropes from 8.9-10.5 mm in diameter.
The Grigri Belay Device, invented by Petzl, introduced a revolutionary technique of belaying and descending. Others have tried to copy but the Grigri remains a quantum leap ahead and is still the premium choice for a self-locking belay. The Grigri allows belaying and lowering of a climber even where the latter is heavier than the belayer. A handle allows easy control of the device and smooth running of the rope. The Grigri works somewhat like an automobile seat belt: when movements are slow, the rope runs freely through the device; when there is a shock load, the Grigri locks, jamming the rope with a cam.
The Trango Pyramid Belay Device could possibly be the best all around belay/rappel device on the planet. The Pyramid is light, compact, durable, and can smoothly handle just about any rope combination. Features machined cooling fins that work both to keep it cool and to make it less prone to being dropped. Pivoting center pin lets you flip it over to customize the feed of your ropes without affecting its stopping power. Rappeling is always controlled and jerk-free and the flat rope path virtually eliminates kinking. Elongated center pin makes it easy to rig with stiff or fat ropes and the burly retaining cable will last the life of the product.”The Trango Pyramid is a time honored design and for good reason ? its versatile and effective design still ranks at the top of the pack. The long tapered tube, which provides a smooth rope-bearing surface and features effective heat-dispersing metal fins, flips so that you can rig either the narrow end close to the biner for extra control or the wide end for quickly feeding rope. Using the narrow end can make for snaggy rope feeding, so judge your belay situation accordingly.” -Climbing Magazine
Description of Petzl Cordex Belay/ Rappel GlovesLightweight belay and rappel gloves.Features:Articulated, anatomical cut for superior fitGoat skin leather for excellent dexterityStretch fabric back increases comfort and breathabilityVelcro closure & stretch cuff for easy on and offDoubled leather palm for durabilityCarabiner hole for easy attachment to harness or belt
The Shell Belay Device by Camp USA is an aluminum alloy belay and rappel device for single (10-11mm) and double ropes (8-9mm). FEATURES of the Shell Belay Device by Camp USA Rock Climbing – Alpinism – General Mountaineering Simple – reliable belay and rappel device SPECIFICATIONS: Rope MM: Single 10-11 mm – Double 8-9 mm Weight: 62 g – 2.2 oz
